20:00

PDF|

Guide for Juniper-JN0-649

Quiz Juniper-JN0-649

Free Test
/ 10

Quiz

1/10
You are troubleshooting a BGP connection. Referring to the exhibit, which two statements are correct? (Choose two.) Certification Exam Juniper-JN0-649 Juniper Juniper-JN0-649 2-667816253
Select the answer
2 correct answers
A.
Packet fragmentation is preventing the session from establishing.
B.
The 192.168.1.5 peer has a misconfigured MD5 key.
C.
The ge-0/0/1 interface is disabled.
D.
The 192.168.1.4 peer has a misconfigured autonomous system number.

Quiz

2/10
Referring to the exhibit, anycast RP is implemented to ensure multicast service availability. The source is currently sending multicast traffic using group 239.1.1.1 and R3 is receiving PIM register messages, but R2 does not have active source information. In this scenario, what are two methods to receive the active source information on R2? (Choose two.) Certification Exam Juniper-JN0-649 Juniper Juniper-JN0-649 3-1865101277
Select the answer
2 correct answers
A.
Configure an RP set in PIM on R1, allowing R1 to forward PIM register messages to R2 and R3 in the set.
B.
Configure an MSDP protocol between R2 and R3.
C.
Configure an RP set in PIM on R2 and R3, allowing the RPs to forward PIM register messages to the other RPs in the set.
D.
Configure an MSDP protocol between R1 and R2.

Quiz

3/10
You are asked to establish interface level authentication for users connecting to your network. You must ensure that only corporate devices, identified by MAC addresses, are allowed to connect and authenticate. Authentication must be handled by a centralized server to increase scalability. Which authentication method would satisfy this requirement?
Select the answer
1 correct answer
A.
MAC RADIUS
B.
captive portal
C.
802.1X with single-secure supplicant mode
D.
802.1X with multiple supplicant mode

Quiz

4/10
Referring to the exhibit, which LSA type is used to advertise 192.168.1.0/24 to R5? Certification Exam Juniper-JN0-649 Juniper Juniper-JN0-649 4-2673105539
Select the answer
1 correct answer
A.
Type 5
B.
Type 4
C.
Type 3
D.
Type 7

Quiz

5/10
You enable the Multiple VLAN Registration Protocol (MVRP) to automate the creation and management of virtual LANs. Which statement is correct in this scenario?
Select the answer
1 correct answer
A.
The forbidden mode does not register or declare VLANs.
B.
When enabled, MVRP affects all interfaces.
C.
Timers dictate when link state changes are propagated.
D.
MVRP works with RSTP and VSTP.

Quiz

6/10
Which address range is used for source-specific multicast?
Select the answer
1 correct answer
A.
239.0.0.0/8
B.
233.0.0.0/8
C.
232.0.0.0/8
D.
224.2.0.0/16

Quiz

7/10
Which three configuration parameters must match on all switches within the same MSTP region? (Choose three.)
Select the answer
3 correct answers
A.
VLAN to instance mapping
B.
revision level
C.
configuration name
D.
bridge priority
E.
region name

Quiz

8/10
Which two statements are correct about the deployment of EVPN-VXLAN on QFX Series devices? (Choose two.)
Select the answer
2 correct answers
A.
Type 1 route advertisements always have the single-active flag set to 1.
B.
Junos OS supports underlay replication for BUM traffic forwarding.
C.
Junos OS supports ingress replication for BUM traffic forwarding.
D.
Type 1 route advertisements always have the single-active flag set to 0.

Quiz

9/10
Your enterprise network is running BGP VPNs to support multitenancy. Some of the devices with which you peer BGP do not support the VPN NLRI. You must ensure that you do not send BGP VPN routes to the remote peer. Which two configuration steps will satisfy this requirement? (Choose two.)
Select the answer
2 correct answers
A.
Configure an import policy on the remote peer to reject the routes when they are received.
B.
Configure an export policy on the local BGP peer to reject the VPN routes being sent to the remote peer.
C.
Configure a route reflector for the VPN NLRI.
D.
Configure the apply-vpn-export feature on the local BGP peer.

Quiz

10/10
You want to create an OSPF area that only contains intra-area route information in the form of Type 1 and Type 2 LSAs. In this scenario, which area is needed to accomplish this task?
Select the answer
1 correct answer
A.
totally non-to-stubby area
B.
totally stubby area
C.
stub area
D.
non-to-stubby area
Looking for more questions?Buy now

Juniper-JN0-649 Practice test unlocks all online simulator questions

Thank you for choosing the free version of the Juniper-JN0-649 practice test! Further deepen your knowledge on Juniper Simulator; by unlocking the full version of our Juniper-JN0-649 Simulator you will be able to take tests with over 65 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 65 questions.

BUY NOW

What to expect from our Juniper-JN0-649 practice tests and how to prepare for any exam?

The Juniper-JN0-649 Simulator Practice Tests are part of the Juniper Database and are the best way to prepare for any Juniper-JN0-649 exam. The Juniper-JN0-649 practice tests consist of 65 questions and are written by experts to help you and prepare you to pass the exam on the first attempt. The Juniper-JN0-649 database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with Juniper-JN0-649 Simulator will also give you an idea of the time it will take to complete each section of the Juniper-JN0-649 practice test . It is important to note that the Juniper-JN0-649 Simulator does not replace the classic Juniper-JN0-649 study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the Juniper-JN0-649 exam.

BUY NOW

Juniper-JN0-649 Practice test therefore represents an excellent tool to prepare for the actual exam together with our Juniper practice test . Our Juniper-JN0-649 Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our Juniper-JN0-649 Simulator and how our unique Juniper-JN0-649 Database made up of real questions:

Info quiz:

  • Quiz name:Juniper-JN0-649
  • Total number of questions:65
  • Number of questions for the test:50
  • Pass score:80%

You can prepare for the Juniper-JN0-649 exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our Juniper-JN0-649 Simulator.

Use our Mobile App, available for both Android and iOS devices, with our Juniper-JN0-649 Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all Juniper-JN0-649 practice tests which consist of 65 questions and also provide study material to pass the final Juniper-JN0-649 exam with guaranteed success. Our Juniper-JN0-649 database contain hundreds of questions and Juniper Tests related to Juniper-JN0-649 Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW